Home Project FYI. Your Home Project Information and Idea Place

Help and Ideas For Your Home Remodeling Project

Home Project FYI. Your Home Project Information and Idea Place - Help and Ideas For Your Home Remodeling Project

Organic Solar Concentrators and Solar Gardens

Solar Organic Concentrators and Solar Gardens

 Organic solar collectors use dye to concentrate the sun's rays onto solar cells

As reported in The EconomistScience, and other publications, researchers from the Massachusetts Institute of Technology (MIT) have developed a special kind of dye that can transform ordinary glass into a photovoltaic solar panel. Although this technology, known as organic solar concentrators (OSC), is still highly experimental, inspectors may soon find windows doubling as solar collectors.

OSCs utilize windows as collectors, directing light energy to solar cells in the window frames. To accomplish this, a special dye is affixed to the surface of a piece of the glass, which is then exposed to a light source. The dye absorbs incoming light and re-emits it inside the glass, where it bounces along until it reaches the edge. There, awaiting the absorbed light, is a thin layer of solar cells, which converts the light into electricity. The bouncing of the light is described by a principle known as “internal refraction,” which is the same phenomenon that keeps light trapped in optic fibers.

This design is essentially an evolved form of an idea that was abandoned in the 1970s, known as luminescent solar concentration. These early experiments failed because collected light was absorbed before it reached the edges of the glass (or plastic) plates. The MIT team solved this problem by adding a small concentration of dye that collects the absorbed light from its surrounding dye. They also introduced a new class of dye molecules, known as molecular phosphors, which are exceptionally transparent to their own light emission.

This innovation offers a contrasting approach to traditional solar concentrators, which use mirrors to concentrate sunlight onto solar panels. These devices are large and expensive, which limit their utility. Specifically, they rely on bulky sun-tracking mirrors that aren’t feasible in most residential settings. OSCs perform the same function as solar concentrators, but they lack the problems that make their predecessors cost-prohibitive and unwieldy.

The solar concentrating dye can also be applied to existing solar cells, enhancing their light-capturing ability by as much as 30%. MIT engineer Marc Baldo, quoted at TheHotSpring.com, said, “We think that, ultimately, this approach will allow us to nearly double the performance of existing solar cells for minimal added cost.”

The team has founded a company called Covalent Solar, which plans to commercialize the technique and market it to homeowners and businesses within the next three years. Of course, the opinions of the researchers may be biased, as they also plan to profit from the sale of the technology. But if these dye-based solar concentrators can truly replace conventional solar collectors, and they become widely distributed, they could revolutionize the role of solar power in the global energy economy.

For now, the team must deal with technical complications, some of which are described below:

  • The dyes would degrade natural lighting by preventing 90% of sunlight from entering the room. Windows dyed in this way would appear as smoked glass, which some may find objectionable.
  • If too much dye is used, some of the light may be re-absorbed before it reaches the solar cells.
  • Currently, the devices are not stable for a long enough period to be ready for mass production. Researchers tested one model and found that it was only effective (up to 92% performance) for three months. The next design will incorporate technology developed for organic light-emitting devices to increase longevity.

FYI, OSC technology may revolutionize the way homes and businesses receive their energy.

Solar Gardens

Solar gardens, such as this one, may soon allow renters and homeowners who live in the shade to produce solar energy

Colorado renters, low-income residents and homeowners who live in the shade will find it much easier to participate in the generation of solar power, pending the passage of new legislation HB 1342. At the end of March 2010, a compromise was forged between Colorado House Rep. Claire Levy and the Colorado Solar Energy Industries Association (CoSEIA) that would legalize the use of community-owned solar arrays, known as solar gardens, in communities statewide.

Currently, homeowners must install solar arrays on their own properties in order to qualify for subsidies and net metering. The new House bill allows people to buy into nearby solar arrays and receive credits from the state’s largest utility, Xcel Energy. Each customer would then own a share in the solar garden, but would still be consuming standard grid power; the energy produced by the solar gardens would be used to offset the electrical consumption of its owners. And, as with investment in any form of solar energy, solar garden owners could be faced with a slightly higher energy bill.

The bill will empower residents who, for various reasons, are unable to support a rooftop solar array. By expanding the solar market, the bill will also help remove a major obstacle to goals set by federal and state lawmakers concerning energy consumption. Specifically, the legalization of solar gardens will help Colorado reach the goal, signed into law by Gov. Bill Ritter, requiring that 30% of the state’s electricity be generated by renewable energy sources by 2020.

The bill has opponents, however.  Some activists fear “energy sprawl,” or the loss of open space to large, ground-mounted solar arrays. Renewable energy expert Tom Konrad told the Boulder Weekly, “Any law which makes solar more likely to be ground-mounted than rooftop is a step in the wrong direction.” Local solar installers, too, feel threatened that the new legislation will permit large and more economical installations to eat into their market share. At issue specifically is language in the bill that may force them to compete with solar gardens for public funds. Levy rejected some of the concerns of local installers, saying that they “seemed more concerned about protecting their market share than expanding the use of solar energy in the state.”

Colorado is not alone in its efforts to promote solar gardens, which have become known as “solar shares” in California, and have cropped up in communities across Utah and Massachusetts. U.S. Sen. Mark Udall (D-Colo.) recently introduced the Solar United Neighborhoods (SUN) Act of 2010, which would extend the perks of the recent Colorado bill to the entire nation.

Liberalization of solar policies may soon be reflected in the emergence of this new kind of solar exploitation.

Solar Info

TumblrShare

Nightlights Safety FYI

Nightlights Facts and Figures

Nightlights are small, low-powered electrical light source placed for comfort or convenience in indoor areas that become dark at night.

Facts and Figures about Nightlights

  • Before they were powered electrically, nightlights were usually long-burning candles placed in fireproof metal cups, known as tealights in some countries. (Tealights in the U.S. refer to very short and wide candles that can be purchased within or without an aluminum tin cup that are commonly used inside a decorative glass holder.  They are also known as votive candles.)
  • There are roughly 90 million nightlights purchased each year in the United States. In 2001 alone, more than 600,000 of them were recalled by manufacturers for safety reasons.
  • Defective nightlights can cause fires, burns and electrocutions.

Uses For NightlightsNightlights

Nightlights are typically installed to create a sense of security and to alleviate fears of the dark, especially for children. They also illuminate the general layout of a room without causing the eyestrain created by a standard light, helping to prevent tripping down stairs or over objects. This is an important safety measure for older adults, for whom falls are the leading cause of injury-related deaths, according to the National Association for Home Care and Hospice. Nightlights may also be used to mark an emergency exit.

Types of Nightlights

A wide variety of nightlights is available to homeowners; bulbs vary from incandescent to energy-efficient options, such as light-emitting diodes (LEDs), neon lamps, and electroluminescent bulbs. Some of these devices are equipped with a light-sensitive switch that activates the light only when it’s dark enough for them to be required, saving electricity and the effort needed to manually turn them on and off. Some designs also incorporate a rechargeable battery so they will continue to function during power outages.

Nightlights present the following hazards:

  • fire. Nightlights can become excessively hot, causing them to melt and pose a risk of fire if they come in contact with flammable materials, according to the U.S. Consumer Product Safety Commission (CPSC). The CPSC receives roughly 10 reports annually of fires that were caused when nightlights ignited toilet paper, pillows, bedspreads and other flammable materials. In many of these cases, the nightlight was installed so close to the bed that falling blankets or pillows made contact with the nightlight and started a fire. For this reason, nightlights should not be plugged in next to bed coverings, curtains, and other potentially flammable objects and materials. InterNACHI inspectors can also make sure nightlights are not covered with tape, cardboard or any other material that might cause them to overheat. Homeowners may consider using nightlights equipped with mini neon bulbs instead of higher-wattage bulbs;
  • poisoning. So-called “bubble” nightlights are special, decorative nightlights that contain a dangerous chemical called methylene chlDecorative nightlights like this one might attract unsafe attention from small childrenoride. If the vial breaks, the unit should be thrown away immediately and precautions should be taken to avoid skin contact with the leaking chemical; and
  • electric shock. Nightlights pose the risk of electric shock when used outdoors or in locations that may become wet, such near sinks or hot tubs, or in garages or covered patios. They should never be plugged into an extension cord, surge-protector strip, multiple-outlet strip, or other movable types of receptacles. Electric shock is also possible if the nightlight overheats and melts.

The following are a few of the many models of nightlights that have been recalled due to electrical and fire hazards:

  • Molenaar™ brand, model numbers 2017 and 2019 that are shaped like a rectangle and a house, respectively, and include the etched engraving “71980 U.S.A”: 315,000 units recalled;
  • Forever-Glo™: 35,000 units recalled;
  • LED Rocketship PalPODzzz™ Portable Nightlights:  26,000 units recalled; and
  • Energizer™ Light-on-Demand Wallplate Nightlights: 3,000 units recalled.

Additional Tips for Nightlights

  • Plug the nightlight into an exposed wall outlet where it will be well-ventilated.
  • Do not repair any nightlight yourself.  Only replace the bulb.
  • Avoid installing nightlights in locations where they might be exposed to excessive sunlight, as UV rays will degrade the plastic.
  • Never let children handle nightlights. If you have small children, avoid purchasing or installing a nightlight decorated with cute or funny figures to which they may be attracted and that may be easy for them to reach.

FYI, nightlights are used for comfort and safety, although homeowners should take precautions when purchasing and using these devices.

TumblrShare
SEO Powered by Platinum SEO from Techblissonline